STRONG ENOUGH FOR COMMERCIAL. ELEGANT ENOUGH FOR RESIDENTIAL.
With pre-installed cables and a patent pending rail tensioner, our vertical cable railing system is easy to install with no special tools required to update your railing today. This system is designed with easy to assemble installation kits, modern tensioning, hidden hardware and a beautiful top rail of your choice.
TEXTURED COLORS
WHITE
BLACK
BRONZE
WOOD GRAIN TOP RAILS
MAHOGANY
OAK
We want to be sure you have everything you need to complete your railing project. Here are all of the pieces you will need:
- Pre-Assembled Cable Panel
- 3-inch End Post
- Support Leg
- Surface or Fascia Mount
- Post Cap or Light
- Stainless Steel Support Rod
Important Note:
- 42-inch post kits are required for middle/bottom stair posts when installing a 36-inch system.
- 48-inch post kits are required for middle/bottom stair posts when installing a 42-inch system.
Understanding Your Railing
Standard Vertical Cable Railing
Open Mid-Rail Vertical Cable Railing
TOP RAILS
RAIL KITS
6' Vertical Railing Panel Kit
- Available in 36" height only
- Top Rails: Alta, Victorian and Drink Rails
- Refer to Product Catalog for pieces and part numbers
6' Vertical Railing Stair Panel Kit
- Available in 36" height only
- Top Rails: Alta, Victorian and Drink Rails
- Refer to Product Catalog for pieces and part numbers
POST KITS
3" Post Kit
- 36-inch and 42-inch heights.
- Available in black, white and bronze
- Refer to Product Catalog for pieces and part numbers
HARDWARE
22 1/2 Degree Panel Attachment Kit
45 Degree Wall Mount Kit
Alta Corner Kits
Bottom Snap Collar Kits
Cut Collar Kits
Deck and Stair Attachment Kit
Drink Rail Attachment Kit
Rail Clip Jig and Touch Up Kit
Top Rail End Caps
Wall Mount Attachment Kit
LIGHTING
3” LED POST CAP PERIMETER LIGHT
Black P/N: LE045310B
Bronze P/N: LE045310Z
White P/N: LE045310W
Technical information
- .3 watts
- 3 Samsung LEDs
- 4,000 Kelvin (natural white)
- Lights do not have polarity
- Each individual LED puts out 13 lumens
- There are 3 LEDs = 39 Lumens
- Light will appear as a brighter “glow” because it directs out light 360 degrees through the polycarbonate lens
3” LED POST CAP INDIRECT LIGHT
Black P/N: LE045311B
Bronze P/N: LE045311Z
White P/N: LE045311W
Technical information
- 1.2 watts
- 12 Samsung LEDs (3 LEDS per side)
- 4,000 Kelvin (natural white)
- Lights do not have polarity
- Each individual LED puts out 13 lumens
- There are 12 LEDs = 156 Lumens
- Lumens will appear similar to the Perimeter light in brightness because the light is encased in the metal post cap and is shining downwards
SOLAR 3” LED POST CAP PERIMETER LIGHT
Black P/N: LS045310B
Bronze P/N: LS045310Z
White P/N: LS045310W
Technical information
- 3 Lumens
- 3,000 Kelvin (warm natural white)
- LiFePo4 battery (14500 capacity, 600mAh)
- Light will appear as a “glow” because it directs out light 360 degrees through the polycarbonate lens
LOW PROFILE POST CAP (without light)
Black P/N: CC025303B
White P/N: CC025303W
Bronze P/N: CC025303Z
POWER PACK
12V 100W single tap, built in adjustable timer and photo cell
P/N LE095101
UR WIRE CONNECTORS
10 Pack. Replacement part – also included with post cap lights.
P/N LE095104
100' 16/2 GA WIRE
P/N LE095103
IMPORTANT NOTES:
- Actual picket panel sizes: 6' Panels = 69.43"; 8' Panels = 91.31".
- 3" posts are required to reach 6' & 8' lengths.
- MAXIMUM POST SPANS ON STAIR RAILING APPLICATIONS IS 70" ON CENTER.
- Stair railing panels are shipped at a 37° angle. Panels are adjustable and will accommodate 30-40° stair angles.
- CAUTION: Over adjusting stair panels will cause loose and rattling pickets.
- 45° deck angles require 22.5°clips applied to each side of the post. The 22.5° clip kit is sold SEPARATELY.
- Using 2 Posts at top of stairs is recommended if compound angle cut is required.